Menu
Your Cart
Up To 20% OFF Clearance products Shop now

ZeroTech Retracting Gear with UBEC and controller

ZeroTech Retracting Gear with UBEC and controller
ZeroTech Retracting Gear with UBEC and controller
ZeroTech Retracting Gear with UBEC and controller
ZeroTech Retracting Gear with UBEC and controller
ZeroTech Retracting Gear with UBEC and controller
Fast Delivery
Fast, Reliable & Secure Delivery

ZeroTech Retracting Gear with UBEC and controller

Features: The retracting gear weighs 620g, including the UBEC and the controller.

Features are as below:
High strength, quick installation without soldering.
To avoid damage to the gimbal, it will not retract when power on.

Operation
Auto retracting function only available in double pilot mode, on the gimbal Tx.

Wiring and settings steps:
1. For the wiring, please kindly refer to the wiring diagram below.

zerouav retract gear

Note: use the wiring clip to fasten the connector to void the connectors dropping.

2. Connect the servo lead of the left and right retracting gear servo to the “L SERVO” and “R SERVO” port on the controller. The controller is powered on by the 6V output of the UBEC power module, the lead connects to POW(black wire upside)

3. The input signal lead of the controller connects to the CH7 of the gimbal receiver.

zerouav retract landing gear

 

4. Set the CH7 on the Tx Radio, for example, the LD.

 

Write a review

Note: HTML is not translated!
Bad Good
Captcha
  • Stock: In Stock
  • Model: zeroUAV retractgr
  • Weight: 1.00
0 samples sold
£605.10
Notification Module
We use cookies to provide you with the best possible experience. By continuing to use our site, you agree to our use of cookies.