Dualsky XC10036HV V2

Dualsky XC10036HV V2

Description:
XC10036HV-V2, 100 amps output, 5-12s Lipo supported, OPTO isolation. Suit for FAI 2 meters F3A or F3C.

Features:

● The new designed 2nd version software and hardware have many new features.
● Supports all motor types up to 210,000 rpm(2 Poles motors).
● Extremely low resistance, factory high quality MosFETs, for high current usage.
● Dualsky Governor Mode(DGM) ready.
● Adjustable cut-off, either motor stop or reduction in power.
● DLBM on/off - Dualsky Linear Brake Mode. Brake strength can be adjusted by transmitter 
when switch on.
● Full protection features including: Low voltage cut-off, Over heating protection, signal loss 
auto cut-off.
● Normal and Super-Soft start up modes available, for both fixed wing and helicopter setups.
● Smooth and accurate throttle control throughout the range.
● Throttle digital signal sampling, compatible with the signal frequency of 14 ms(Normal mode) 
and 7 ms high-speed mode (HS Mode).
● Throttle range can be re-calibrated, so suitable for all brands of transmitter.
● Fully PC programmable when used with Dualsky USB link(#45525).
● Compatible with programming card(#45200) for easy re-programming at the field!
● Control signal  applied OPTO technology, eliminate the interference from high voltage to the
control system.

Specification： 
Dimensions: 90x 55x 20mm(L x W x D)
Weight: 140g
Number of Cell: NiXX 15-36, 18-43.2V
                         LiPo 5-12S, 18.5-44.4V
Resistance(Ri)(Ohm): 0.0023
Max Cont.  Current & Max Cont.Output: 100A, 3780W
Max Burst Current & Max Burst Output:  120A, 4896W
BEC / Dissipative Power:N/A OPTO
Programmable: Throttle + ProgCARD V2
Input Wires: 150mm, 12AWG, DC3
Output Wires: 90mm, 12AWG, DB4
Signal Wire: 300MM JR

Applications:
2M FAI F3A and 3D
Up to 10kg Large Models