Menu
Your Cart
Up To 20% OFF Clearance products Shop now

Maytech MT85A ESC (Pair)

Maytech MT85A ESC (Pair)
Maytech MT85A ESC (Pair)
Fast Delivery
Fast, Reliable & Secure Delivery

Maytech MT85A ESC(Pair)

Maytech Harrier Suprem Series ESCs with SimonK Firmware Pre‐flashed.

Priced for 2x MT85A-SBEC-HS-MK or 2x Maytech MT85A-OPTO-HS-MK  ESCs

Application: RC Airplanes, Helicopters, Multicopters

MT85A-SBEC-HS-MK

Cont.Current 85A

Lipo2-6Cells  Burst Current(10sec)100A NiMh6-18 Cells

Net Weight 57g

BEC 6V/5A Switch Mode

PCB Size(mm)(L x W x H)59x36x15

Programe DeviceTransmitter/Programe Card

MT85A-SBEC-HS is a new generation of brushless and sensorless speed controllers with the control of micro processor. Its performance in terms of compatibility, reliability and stability can compete with world famous brands. Its shrink tube and cable length can be made according to your unique demand.

Main Features:
Extremely low internal resistance.
Super smooth and accurate throttle linearity.
Power arming protection: Prevents the motor from accidentally running when switched ON.
Lost Throttle signal protection:
The ESC will automatically reduces output power to the motor when it detects a lost of throttle signal for 1 second. A subsequent loss of throttle signal beyond 3 seconds will cause the ESC automatically to cut power to the motor.
Safety thermal over-load protection:
Automatically reduce output power to half when the temperature reaches 110Degrees Celsius, restore output power when the temperature is below 110 Degrees Celsius.
Governor Mode: For Helicopter application.
With latest humanize software design, especially for all types of brushless motor.
Parameters programmable function to meet your specific needs.
The MAYTECH ESC's high power BEC has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

 

MT85A-OPTO-HS-MK

MT85A-OPTO-HS is a new generation of brushless and sensorless speed controllers with the control of micro processor. Its performance in terms of compatibility, reliability and stability can compete with world famous brands. Its shrink tube and cable length can be made according to your unique demand.
Main Features:
Extremely low internal resistance.
Super smooth and accurate throttle linearity.
Power arming protection: Prevents the motor from accidentally running when switched ON.
Lost Throttle signal protection:
The ESC will automatically reduces output power to the motor when it detects a lost of throttle signal for 1 second. A subsequent loss of throttle signal beyond 3 seconds will cause the ESC automatically to cut power to the motor.
Safety thermal over-load protection:
Automatically reduce output power to half when the temperature reaches 110Degrees Celsius, restore output power when the temperature is below 110 Degrees Celsius.
Governor Mode: For Helicopter application.
With latest humanize software design, especially for all types of brushless motor.
Parameters programmable function to meet your specific needs.
The MAYTECH ESC's high power BEC has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

maytech 85A esc


  • PCB Size(mm)(L x WMain Feature 

Write a review

Note: HTML is not translated!
Bad Good
Captcha
  • Stock: In Stock
  • Model: MT85A‐SBEC‐HS
  • Weight: 0.20
0 samples sold
£110.30

Available Options

Tags: maytech , mt85a , esc
Notification Module
We use cookies to provide you with the best possible experience. By continuing to use our site, you agree to our use of cookies.