Walkera Runner 250 PRO RTF Racing Drones

Walkera Runner 250 PRO Racing Drones

Here's a drone for someone looking to get into the hobby. The Runner 250 PRO incorporates GPS, so it’s like having a co-pilot on board. At the flick of a switch you can put the Runner into a position hold hover or at another send it back home to land.

The Runner features a built in camera and video transmitter so it's FPV ready; to complete the setup you’ll just need a monitor or some video goggles. It even has an on board OSD module which overlays you flight footage with telemetry such as battery voltage and artificial horizon. Of course you don't have to fly it FPV, you can fly it line of sight and thanks to its bright headlights and indicator LEDs, orientating the Runner is made much easier.

The Runner is a full carbon fibre frame so it's pretty tough. Should you damage it, the Runner's modular design allows you to change out crash damaged components in a matter of minutes. The speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated distribution board meaning no soldering is required.

It ships assembled from the factory and complete with everything you need to get flying in one box, including Devo 7 radio transmitter good for a 1km range, 3S LiPo battery and AC battery charger.

Features:

• Ready to fly 250 size racer
• Features Walkera's latest flight controller
• GPS enable supports altitude hold, position hold and return to home functions
• GPS + GLONASS dual satellite system for accurate hovering and precision flying
• Built in buzzer alarm system which will activate when RC signal is lost or can be used as a lost model alarm
• Built-in 5.8Ghz FPV video transmitter
• Built-in OSD Module (On Screen Display) to show you real-time flight data
• Fully factory assembled, charge the battery and fly!
• Modular design for easy build and repair
• Self tightening toughened composite props
• Compact carbon fiber main frame
• Dampened camera mount platform
• Front and rear LED lights
• Direction indicator lights, for example when the runner turns left, the left light will activate
• 10-12 mins flight time

Version1: Walkera Runner Pro 250 FPV Racer with GPS, 800TVL Camera, OSD & Devo 7 TX (RTF)

Runner 250 Pro Specifications :

• Main Rotor Dia: 143mm
• Overall (L x W x H): 221 x 205 x 117mm
• Weight: 464g (Battery excluded)
• Receiver  DEVO-RX717
• Main Controller: FCS-250
• Transmitter: TX5835(CE) 25mw version (OSD included)
• Brushless Motor: WK-WS-28-014A (CW/CCW)
• Brushless ESC: F210 ESC
• Battery: 11.1V 2200mAh 25C 3S Li-Po
• Flight Time: 10~12mins
• Working Temperature: -10℃~+40℃
• Remote Controller  DEVO 7 (* Optional DEVO F12E w/ 5" FPV Monitor)

Camera:

• Resolution: 800TVL
• System: PAL/NTSC
• Video Out: 1.0Vp-p/75
• Power Input: DC 12V

DEVO 7 Specifications :

• Encoder: ARM micro computer system
• Frequency: 2.4Ghz（DSSS）
• Output power:-5dBm~20dBm
• Battery: 1.2VX8 NiCard or1.5VX8 AA dry batteries 
• Current Drain: ≤170mA

Included:

• Walkera Runner 250 Pro
• Walkera DEVO 7 Radio System
• 1x 11.1V 2200mah 25C Li-Po Battery
• 4pcs Clockwise Propeller
• 4pcs Counter-Clockwise Blade Propeller
• Battery Charger
• English Manual